S-0808

New possibilities in multi-channel audio distribution

The S-0808 has unprecedented mobility enabling further convenience in many applications such as broadcast, event, live stage, audio installation and location sound. Enjoy flexibilty in setup using external battery operation or power supplied over REAC.

Product Highlights

8 inputs x 8 outputs
Compact, light-weight, rugged
External battery powered or embedded power over REAC
TRS and Hi-Z inputs

diagram_callout

New possibilities in multi-channel audio distribution

Compact and Light-weight
The S-0808 weighs around 6.6lbs making it portable and easy to setup. Rugged construction with steel handles withstands the rigors of live applications and frequent use. Fan-less design enables quiet operation in any environment.

Superb Quality, Fully Discreet Preamp
All inputs employ a high quality preamp with fully discreet circuit design resulting in outstanding sound. Eliminate the need for direct boxes by using the TRS or Hi-Z inputs. Control input gain (-65 to +10dBu), Pad and Phantom Power via a dedicated S-4000R Remote Controller or using the PC Remote Control Software (S-4000RCS). When using as part of a V-Mixing System, these parameters are controlled directly from the M-400 or M-380 V-Mixer.

Power Options
The S-0808 is powered by REAC Embedded Power, External Battery Options or Power over Ethernet (PoE). Choose the type of power conducive to you location and application. Having not to rely on AC power opens up a world of convenience and flexibility. V-Mount (IDX) and Gold Mount (Anton Bauer) battery systems and mounts are supported using the included universal adapter plate.

diagram_01

s0808_self_powered

s0808_ac_poe

S-0808 Specifications
Number of Channels	8 in, 8 out
AD / DA conversion	Sample Rate: 96.0 kHz / 48.0kHz / 44.1kHz Signal Processing: 24 bit
Frequency Response	-2 dB / +0 dB (@ +4 dBu, 20 Hz ~ 20 kHz)
Total Harmonic Distortion + Noise	0.04 % or less (Pad: On, Input Gain: +4 dBu, 22 Hz to 20 kHz)
Dynamic Range	110 dB
Cross Talk	-80 dB or less (Input Gain: +4 dBu, typ.)
Nominal Input Level	-65 ~ -10dBu (Pad: Off), -45 to +10 dBu (PAD: On) (1 dB step, Max. +28 dBu)
PAD	20dB On/Off
Input Impedance	7 k ohms
Nominal Output Level	+4dB, max. +22dBu
Output Impedence	600 ohms
Recommended Load Impedance	10k ohms or greater
Residual Noise Level (IHF-A, typ.)	-80 dBu or less
Equivalent input Noise Level (E.I.N.)	-128 dB
Network Latency	375 microseconds when using REAC cable only *1 (AD - REAC - DA Latentie: ±1,2ms)
Connectors	Input x 8 (XLR type, balanced, phantom power, INPUT 1-8) Input x 2 (TRS type, balanced, INPUT 5/6) 2 Input x 2 (TRS type, balanced, with Hi-Z switch, INPUT 7/8) 2, *3 Output x 8 (XLR type, balanced) REAC EMBEDDED POWER x 1 (RJ-45 EtherCon type) REMOTE x 1 (RS-232C, DB-9 type), DC IN x 1 (XLR 4pin type)
Power Supply	REAC EMBEDDED POWER or External Battery (DC 12V - 18V)
Power Consumption	24 W
Phantom Power	+48 V / 14 mA (each input, remote controlled)
Dimention	220.0 (W) x 176.0 (D) x 156.6 (H) mm, 8-11/16 (W) x 6-15/16 (D) x 6-3/16 (H) inches
Weight	2.9 kg, 6 lbs 7 oz
Accessories	Battery Plate Holder and Fastening Screws (8 pcs), REAC Connector Covers x 1 Ferrite Core x 2, Fastening Screw x 4, Owner's Manual
(0 dBu = 0.775 Vrms)
1: XLR connector 1: GND, 2: HOT, 3: COLD 2: TRS takes priority if XLR and TRS are simultaneously input to INPUT 5-8. 3: TRS of INPUT 7/8 turns to unbalanced when Hi-Z is turn on. When a REAC Splitter S-4000-SP or a switching hub is used in-line with REAC cables, the network latency will increase by the amount of processing delay introduced by the splitting device itself. The actual delay is dependant upon the specifications of the splitting device, though the maximum delay amount for a single splitting device should be about 200 microseconds. In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.

New possibilities in multi-channel audio distribution

Configure for a variety of applications and environments. Connectivity is simple enabling rapid system changes, expansion and flexibility.

s0808_simple_broadcast
Simple system setup using a pair of S-0808s. The S-4000M in a Broadcast Truck (OB Van) provides power to the remote location. Control the remote inputs using the S-4000R.

s0808_concert_hall
Small concert/event configuration using two battery-powered I/O units enable convenience in placing the talent where AC power is not necessarily available. Mix using your choice of V-Mixer.

s0808_broadcast_large
This system allows I/O to be place in 4 separate locations using S-0808s. The signals from the 4 units are merged by the S-4000M as it travels to the S-4000H breakout location. Power to each of the S-0808s is supplied by the embedded power over REAC in the S-4000M.

s0808_live_stage
This system enables the placement of S-0808 units around a stage conveniently
located by the drum riser, keyboards, background vocals, etc.

s0808_small_trio